MAX9041 Datasheet | Analog Devices

Click here to ask an associate for production status of specific part numbers. Micropower, Single-Supply, UCSP/SOT23 parator + Precision Reference ICs MAX9038- MAX9043/ MAX9050- MAX9053 General Description Features The MAX9038- MAX9043 and MAX9050- MAX9053 feature binations of low-power parators and precision voltage references. Their operating voltage range makes them ideal for both 3V and 5V systems. The MAX9038/ MAX9039/MAX9040/MAX9041/MAX9050/MAX9051 have a single parator and reference consuming only 40μA of supply current. The MAX9042/MAX9043/ MAX9052/MAX9053 have dual parators and one reference, and consume only 55μA of supply current. Low-voltage operation and low supply current make these devices ideal for battery-operated systems. The parators feature rail-to-rail inputs and outputs, with a mon-mode input voltage range that extends 250m V beyond the supply rails. Input bias current is typically 1.0p A, and input offset voltage is typically 0.5m V. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage Features a unique design that limits supply current surges while switching, virtually eliminating supply glitches typical of many other parators. This design also minimizes overall power consumption under dynamic conditions. The parator outputs have railto-rail, push-pull output stages except the MAX9038 has an open-drain output that sinks and sources up to 8m A. The propagation delay is 400ns, even with the low-operating supply current. - parator + Precision Reference in UCSP/SOT23 - 2.5V to 5.5V Single-Supply Operation (MAX9038- MAX9043) - Low Supply Current (MAX9038/MAX9039/MAX9040/ MAX9041/MAX9050/MAX9051) - 40μA Quiescent - 50μA with 100k Hz Switching - Open-Drain Output MAX9038 - 400ns Propagation Delay - Rail-to-Rail Inputs - Rail-to-Rail Output Stage Sinks and Sources 8m A - Internal ±3m V Hysteresis - Voltage Reference Offers - ±0.4% (max) Initial Accuracy (A Grade) - 6ppm/°C...